|
| |
|
Features EASY ONE polyester filler can be used on the following surfaces:-
ˇ Bare steel - degrease and abrade with P40 paper.
ˇ Original paint surfaces (with the exception of thermoplastic acrylics)
Degrease and abrade with P180 paper.
Mixing ratio 100 parts by weight EASY ONE polyester filler 2 parts by weight U-POL hardener.
The exact mixing ratio is not critical, although over or under catalyzation may affect the gel time.
Excess hardener will not significantly speed up the gel time and could lead to bleed through and bleaching when over-painting.
Pot life Once mixed, 4 -5 mins. at 20ēC with 2% hardener.
Tools Mixing board, filler knife, plastic or metal spatula.
Drying time Sandable after 20 mins. at 20ēC.
IMPORTANT - This filler is very easy to sand and we therefore recommend that nothing coarser or lower than P80 paper is used. |
|
|
|
U-pol Easy 1
EASY ONE polyester filler is a two component chemical paste used for the filling of holes and imperfections in surfaces such as steel and GRP.
EASY ONE has been specially formulated for the professional using the latest technology in lightweight body fillers, and it combines excellent filling properties together with the easiest sanding of all the U-POL fillers.
|